Description
24 Auto Dent Repair Tools, Includes 5 Glue and Instructions Easy to control, suitable for any person to operate. Repair the dent for yourself directly. Works great on smaller door dings & hail damage; Big dent needs slide hammer or puller.Small dent needs mini dent lifter or pulling bridge. Use different size glue tabs to different dent. Golf ball dimple design dent pulling tabs professional for autos body dent repair. Baking-varnish-free dent repair, will no damage the paint, fast, money-saving, and environmental. Warm Tips: Mini T-type puller before use need to check whether your body has done paint repair or the existence of the car coat to avoid the glue melting the car coat can not be used properly! How to use this paintless dent repair kits: Clean the dent with a clean wet cloth; Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes; Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is); Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue); Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter); Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent; Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen; Clean the repaired place with a clean wet cloth. Package Include: 1 T-Bar 18 Pull Rings 5 glue sticks 1 Instruction Manual Mini T-Pull: 100% brand new and high quality *New Comfort alloy grip T-Handle sidle hammer Glue Puller with 18pcs Puller Tabs *Easy to control, suitable for any person to operate, repair the dent for yourself directly *Works great on smaller door dings & hail damage Hot Melt Glue Sticks: √ Softening Point: 178°F. (81°C.) √ Working Time: 40 seconds √ Viscosity / Centipoises: 5,500 @ 380°F. (193°C.) 12,000 @ 356°F. (180°C.) √ Temperature of Glue Gun: High Temperature √ Shape: Round Dented labels: Repair Dent Perfectly: These pulling tabs are made by high-quality nylon material. Repair the dent avoiding damaging the ori-ginal paint. Used with Hammer: Can be used with T bar hammer or slide hammer for good effect. Such a practical tool you will need it.